MJ1.1/4 2RS BKL Brand Sealed Deep Groove Ball Bearing 1.1/4" inside x 3.1/8" outside x 7/8" wide Sealed RHP designation: MFC2

RHP designation: MFC2

Width between inner plates b1: 11

Preload Axial Rigidity Measured axial clearance EL 36N 51N/μm -1μm L 81N 68N/μm -4μm M 206N 97N/μm -10μm H 403N 127N/μm -17μm Additional information

ID When Fitted: min 25

Inside length: 1219mm / 48 inches

MJ1.1/4 2RS BKL Brand Sealed Deep Groove Ball Bearing 1.1/4" inside x 3.1/8" outside x 7/8" wide Sealed RHP designation: MFC2BKL Single row deep groove ball bearings are used in a wide variety of applications, they are simple in design, non separable, suitable for high speeds and are robust in operation, and need little maintenance. Deep raceway grooves and the close conformity between the raceway grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, in addition to radial loads. Single row deep groove ball bearings are